Application of refractory ceramic fiber products on furnace lining
Feb. 19, 2020
Low temperature section below 650 ℃: The ordinary refractory ceramic fiber products with long-term working temperature of 950 ℃ can meet the requirements.
CCEWOOL high temp ceramic fiber board
Feb. 17, 2020
CCEWOOL high temp ceramic fiber board is made through automatic vacuum forming process. 24 hours continuously working, quickly drying.
Detailed construction steps of insulation rock wool blanket for tunnel kiln
Feb. 12, 2020
The insulation rock wool blanket should be cut into pieces as per the specifications of the waste heat pipe and trimmed uniformly. The vertical and horizontal seams should be left on the top of the pipe when laying.
CCEWOOL high temperature ceramic blanket
Feb. 10, 2020
CCEWOOL high temperature ceramic blanket: Self owned raw material base, material inspection before entering factory, computer-controlled ingredient proportion system, strictly control raw material purity, therefore, manufactured ceramic fiber blanket's shot content is 12%.
Detailed construction steps of high temp ceramic blanket for tunnel kiln
Feb. 05, 2020
The bottom layer of the insulation layer on the top of the kiln should use high-purity high temp ceramic blanket, and the surface layer can be ordinary high temp ceramic blanket..
CCEWOOL 1260 ceramic insulation blanket
Feb. 03, 2020
CCEWOOL 1260 ceramic insulation blanket is produced with self developed inside double needle technology. Tensile strength of CCEWOOL ceramic fiber blanket exceeds 70KPa and quality is stable.