Production process of high temperature Calcium silicate board
Mar. 16, 2020
High temperature Calcium silicate board is produced with static method, while ultra-light high temperature Calcium silicate board is produced with dynamic method.
Production process of fireproof calcium silicate board
Mar. 09, 2020
The production process of fireproof calcium silicate board can be divided into several steps: lime digestion, mixing ingredients, heating gel, pressure forming, autoclaving and drying and dehydration.
Application of ceramic fiber products on furnace lining
Mar. 02, 2020
Ceramic fiber products are neutral and slightly acidic materials. Except for reaction with strong acids and alkalis, they are not corroded by other weak acids, alkalis, water, oil, and steam, and are not wetted with lead, aluminum, and copper.
Application of refractory fiber products on furnace
Feb. 24, 2020
The heat capacity of refractory fiber products is only about 1/10 of the light heat-resistant lining and light castable lining, and the heat capacity of the furnace lining material is directly proportional to the weight of the furnace lining.
Application of refractory ceramic fiber products on furnace lining
Feb. 19, 2020
Low temperature section below 650 ℃: The ordinary refractory ceramic fiber products with long-term working temperature of 950 ℃ can meet the requirements.
CCEWOOL high temp ceramic fiber board
Feb. 17, 2020
CCEWOOL high temp ceramic fiber board is made through automatic vacuum forming process. 24 hours continuously working, quickly drying.